Differences

This shows you the differences between two versions of the page.

--- networking:mikrotik:split_tunnel_01 [2020/04/11 09:38] – rplecko
+++ networking:mikrotik:split_tunnel_01 [2020/08/19 12:02] (current) – rplecko
@@ Line 1: / Line 1: @@
 === Split tunnel - Powershell cmdlet ===
+  - In vpn connection properties select **Internet Protocol V4**
+  - In **General Properties**, click //Advanced//
+  - In **Advanced TCP/IP Settings**, uncheck **Use default gateway on remote network**
-Powershell has a cmdlet available that adds routes on VPN connection and removes them again when the VPN is disconnected: <fc #ff0000>**Add-VpnConnectionRoute**</fc>. It works without having to specify the interface ID.
+[[http://wiki.tuturutu.eu/lib/exe/detail.php?id=networking:mikrotik:split_tunnel_01&media=networking:mikrotik:vpn_props.png|{{  :networking:mikrotik:vpn_props.png?600  }}]]
+Now, your computer will no longer use a gateway on remote network for internet access.
+Next, we need to add a route so the traffic to the remote network could be routed properly.
+Powershell has a cmdlet available that adds routes on VPN connection and removes them again when the VPN is disconnected: \\ <fc #ff0000>**Add-VpnConnectionRoute**</fc> \\ It works without having to specify the interface ID.
 The basic syntax is like this:
-  Add-VpnConnectionRoute -ConnectionName "VPN Connection Name" -DestinationPrefix 10.0.0.0/16
+<code>
+Add-VpnConnectionRoute -ConnectionName "VPN Connection Name" -DestinationPrefix 10.0.0.0/16
+</code>
 After entering this command, the routes will be created/removed automatically on connection/disconnection of the VPN.
-https://docs.microsoft.com/en-us/powershell/module/vpnclient/add-vpnconnectionroute?view=win10-ps
+There is no adequate **Get-VpnConnectionRoute**  to check your current settings, but you can use **Get-VpnConnection**  which gives too much information, but nevertheless, helps.
+[[https://docs.microsoft.com/en-us/powershell/module/vpnclient/add-vpnconnectionroute?view=win10-ps|Add-VpnConnectionRoute Help]] \\
+[[https://docs.microsoft.com/en-us/powershell/module/vpnclient/get-vpnconnection?view=win10-ps|Get-VpnConnection Help]]
+<code>Set-VpnConnection -Name "VPN Connection Name" -SplitTunneling $True
+</code>