The Book

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=== How to run VMware ESXI 7.0 on hardware with unsupported CPUs ===

https://flemmingss.com/how-to-run-vmware-esxi-7-0-on-hardware-with-unsupported-cpus/


If you try to install ESXi 7 on an hardware with older CPU(s) that is no longer officially supported by VMware, you will get a error message similar to this when booting the installation medium:

<code>
VMB: 611:
Unsupported CPU: Intel family 0x06, model 0x1a, stepping 0x5
Intel(R) Xeon(R) CPU		E5520  @ 2.27GHz
See http://www.vmware.com/resources/compatibility
</code>

Even if it is unsupported it might work in practice.
To bypass this error in the boot, do as follows:

  * Reboot into boot media again
  * After the ESXi boot menu when the “Loading ESXi Installer” is starting click SHIFT+O within 5 seconds to add boot options.
  *     Type “ allowLegacyCPU=true” behind the line. Like this:

<code>
<ENTER: Apply options and boot>
> cdromBoot runweasel allowLegacyCPU=true
</code>

  * Click ENTER and continue installation as normal.
  * Eventually you will come across error messages like this:

<code>
Error(s)/Warning(s) Found During System Scan

			Warning(s)

<CPU_SUPPORT WARNIG: The CPU in this host is not supported by
ESXi 7.0.0. Please refer to the VMware Compatibility Guide (VCG)
for the list of supported CPUs.>
</code>

  * Unordered List ItemClick ENTER to continue, and finnish the installation.
  * After the installation medium is removed and the server is restarted the boot options have to be set every time you restart the server.
    
This can be avoided, read on.

=== Permanently allow boot from Legacy CPU ===


The easiest way to accomplish automatic boot with a legacy CPU is to do as follows:

  * Shut down the ESXi Server and remove the boot-USB-drive.
  * Insert the drive in another computer. It will contain two FAT-partitions.
  * Open the the drive with multiple files including BOOT.CFG, and open it in a text-editor.
  * One of the partitions is just containing a BOOT.CFG file and nothing else. this is NOT the one you should edit.

{{ :virtualization:vmware:7:vm7_unsupported_hw_01.png?700 }}


The bottom drive in this picture is the correct one to edit BOOT.CFG on

Add “ allowLegacyCPU=true” to the end of the line starting with “kernelopt=“

<code>
bootstate=0
title=Loading VMware ESXi
timeout=5
prefix=
kernel=b.b00
kernelopt=autoPartition=FALSE allowLegacyCPU=true
modules=jumpstrt.gz --- useropts.gz --- features.gz --- k.b00 --- uc_intel.b00 --- uc_amd.b00 --- uc_hygon.b00 --- procfs.b00 --- vmx.v00 --- vim.v00 --- tpm.v00 --- sb.v00 --- s.v00 --- bnxtnet.v00 --- bnxtroce.v00 --- brcmfcoe.v00 --- brcmnvme.v00 --- elxiscsi.v00 --- elxnet.v00 --- i40en.v00 --- i40iwn.v00 --- iavmd.v00 --- igbn.v00 --- iser.v00 --- ixgben.v00 --- lpfc.v00 --- lpnic.v00 --- lsi_mr3.v00 --- lsi_msgp.v00 --- lsi_msgp.v01 --- lsi_msgp.v02 --- mtip32xx.v00 --- ne1000.v00 --- nenic.v00 --- nfnic.v00 --- nhpsa.v00 --- nmlx4_co.v00 --- nmlx4_en.v00 --- nmlx4_rd.v00 --- nmlx5_co.v00 --- nmlx5_rd.v00 --- ntg3.v00 --- nvme_pci.v00 --- nvmerdma.v00 --- nvmxnet3.v00 --- nvmxnet3.v01 --- pvscsi.v00 --- qcnic.v00 --- qedentv.v00 --- qedrntv.v00 --- qfle3.v00 --- qfle3f.v00 --- qfle3i.v00 --- qflge.v00 --- rste.v00 --- sfvmk.v00 --- smartpqi.v00 --- vmkata.v00 --- vmkfcoe.v00 --- vmkusb.v00 --- vmw_ahci.v00 --- crx.v00 --- elx_esx_.v00 --- btldr.v00 --- esx_dvfi.v00 --- esx_ui.v00 --- esxupdt.v00 --- tpmesxup.v00 --- weaselin.v00 --- loadesx.v00 --- lsuv2_hp.v00 --- lsuv2_in.v00 --- lsuv2_ls.v00 --- lsuv2_nv.v00 --- lsuv2_oe.v00 --- lsuv2_oe.v01 --- lsuv2_oe.v02 --- lsuv2_sm.v00 --- native_m.v00 --- qlnative.v00 --- vdfs.v00 --- vmware_e.v00 --- vsan.v00 --- vsanheal.v00 --- vsanmgmt.v00 --- xorg.v00 --- imgdb.tgz --- state.tgz
build=7.0.0-1.25.16324942
updated=1
</code>

  * Save the file and move the drive back to the server
  * Start the server, ESXi should now boot up without the need of any manual boot option input. 

=== Fixing “This host does not support virtualizing real mode” error ===


Now when VMware ESXi 7.0 is up and running and all looks good you still might run into problems, not unlikely this one (when trying to start a VM):

<code>
Failed to power on virtual machine Home-Assistant. 
This host does not support virtualizing real mode.
The Intel "VMX Unrestricted Guest" feature is necessary to run this virtual machine on an Intel processor.
Click here for more details.
</code>

{{ :virtualization:vmware:7:vm7_unsupported_hw_02.png?700 }}

  * Power On VM
Key
haTask-2-vim.VirtualMachine.powerOn-3629474806
Description
Power On this virtual machine
Virtual machine:

Home-Assistant
State
Failed - This host does not support virtualizing real mode. The Intel "VMX Unrestricted Guest" feature is necessary to run this virtual machine on an Intel processor.

Errors
- This host does not support virtualizing real mode. The Intel "VMX Unrestricted Guest" feature is necessary to run this virtual machine on an Intel processor.
- Module 'CPUIDEarly' power on failed.
- Failed to start the virtual machine.

This issue has to be solved for every current and future VM, but the process is easy and fast when you know how.

  * Click “Edit” on the VM
  * Select “VM Options”
  * Open “Advanced” and select “Edit Configuration…”
  * Click “Add parameter” and fill as follows:

<code>
    Key: monitor.allowLegacyCPU
    Value: true
</code>

{{ :virtualization:vmware:7:vm7_unsupported_hw_03.png?700 }}

  * Click “OK” and “Save”
  * The VM should now work, but be patient. It can take a very long time to boot. 

{{ :virtualization:vmware:7:vm7_unsupported_hw_04.png?700 }}