=== Split tunnel - Powershell cmdlet ===

  - In vpn connection properties select **Internet Protocol V4**
  - In **General Properties**, click //Advanced//
  - In **Advanced TCP/IP Settings**, uncheck **Use default gateway on remote network**

[[http://wiki.tuturutu.eu/lib/exe/detail.php?id=networking:mikrotik:split_tunnel_01&media=networking:mikrotik:vpn_props.png|{{  :networking:mikrotik:vpn_props.png?600  }}]]

Now, your computer will no longer use a gateway on remote network for internet access.

Next, we need to add a route so the traffic to the remote network could be routed properly.

Powershell has a cmdlet available that adds routes on VPN connection and removes them again when the VPN is disconnected: \\ <fc #ff0000>**Add-VpnConnectionRoute**</fc> \\ It works without having to specify the interface ID.

The basic syntax is like this:

<code>
Add-VpnConnectionRoute -ConnectionName "VPN Connection Name" -DestinationPrefix 10.0.0.0/16
</code>

After entering this command, the routes will be created/removed automatically on connection/disconnection of the VPN.

There is no adequate **Get-VpnConnectionRoute**  to check your current settings, but you can use **Get-VpnConnection**  which gives too much information, but nevertheless, helps.

[[https://docs.microsoft.com/en-us/powershell/module/vpnclient/add-vpnconnectionroute?view=win10-ps|Add-VpnConnectionRoute Help]] \\
[[https://docs.microsoft.com/en-us/powershell/module/vpnclient/get-vpnconnection?view=win10-ps|Get-VpnConnection Help]]

<code>Set-VpnConnection -Name "VPN Connection Name" -SplitTunneling $True
</code>