The Book

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=== Cisco IOS Password recovery for 2900XL, 3500XL, 2940, 2950, 2960, 2970, 3550, 3560, and 3750 series switches ===

{{:downloads:pswdrec_2900xl.pdf|Password recovery PDF}}

Power the switch and bring it to switch: prompt

switch: flash_init \\
switch: load_helper \\
switch: dir flash: \\
switch: rename flash:config.text flash:config.old \\
switch: boot \\


After booting the switch enable rename flash:config.old flash:config.text

Sw1# conf t !−−− To overwrite existing secret password Sw1(config)# enable secret

<new_secret_password> !−−− To overwrite existing enable password

Sw1(config)# enable password <new_enable_password>

!−−− To overwrite existing vty password Sw1(config)# line vty 0 15 Sw1(config−line)# password <new_vty_password> Sw1(config−line)# login !−−− To overwrite existing console password Sw1(config−line)# line con 0 Sw1(config−line)# password <new_console_password>

Write the running configuration to the configuration file with the write memory command.

Sw1# write memory Building configuration… [OK] Sw1